|
|
Magnetic Coolant Cleaners |
 |
We manufacture magnetic coolant cleaners that remove ferrous material from the coolant flow and deposit it into a disposable bin. These magnetic coolant cleaners have proven to be the best option for removal of fine ferrous chips or grindings from machine coolant systems and thus are very reliable and provide accurate grinding, and also improve the life span of the coolant as well as the cutting tools. These magnetic coolants are available in capacities ranging from 50 to 1000 litres per minute.
|
 |
 |
|
Magnetic Funnel Filters |
|
We are renowned exporters in the international markets for magnetic Funnel filters that are available with single, dual and multiple magnetic elements ensuring higher capacities. Our funnel filters have magnetic assemblies that can be easily removed and can also be easily maintained and cleaned. These magnetic assemblies are so designed that the majority of trapped iron particles do not interfere with the line of low ensuring that the rate of flow is not reduced. We also provide electro magnetic ferrous filters specially designed for ceramic slurries and glazes that can separate fine iron particles, scales etc. |
|
Magnetic Ferrous Traps |
|
The magnetic ferrous traps manufactured by Erich are so designed that they enable quick release of magnetic tubes for easy inspection and cleaning and are available in sizes ranging from 1/2” through 18” (13-450 mm). Our magnetic ferrous traps are very useful when it comes to liquid filtration and separation within the pipe line. The magnetic tubes within the trap catch the fine iron particles and protect the product purity and also controls the pumps from jamming, reduced damage and maintenance to mixers, refiners, filters, pumps etc. and assures a product free of iron contamination.
|
 |
 |
|
Magnetic Base & V Block |
|
Magnetic V blocks are commonly used in the tool rooms for drilling, grinding and similar applications. Erich Magnetic Bases are the most universal type of dial gauge indicator holder. The base and two sides are energized for gripping of flat surface and a vee-slot enables the base to hold on round surfaces. The exclusive push – button controls turning ON and OFF allows one hundred location of the base on any machine tool. If required a scriber can be fitted in place of dial indicator. The 'V' Block has total three magnetic surfaces. All three magnetic surfaces and the two sides are carefully ground, when turned ON all three magnetic surfaces are activated simultaneously.
|
|
|
|
